Hello all, today I was on 6 meters doing qso's, all went fine with antenna, a mobil one. Sudenly I saw that SWR was increasing a lot, around 3:0, full scale, and stoped TX. Pressed ATU TUNE botton but SWR was always high, so I came home.
Applied my dummyload and all is fine in all bands except 6 meters, even with Transmitter Gain Calibration test it fails because of high swr on 6 meters: Calibrating at 24,930 MHz StopTune: Unexpected response 'TQ1;' to ''. State 77. Retrying Calibrating at 29,000 MHz StopTune: Unexpected response 'TQ1;' to ''. State 77. Retrying Calibrating at 52,000 MHz SWR 7.3:1 is too high for calibration Verify that a dummy load is attached to AN1; Dummy load is attached to AN1 I can confirm it. Any help will be welcome here. Best 73 to all. CT1DRB David Quental ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
