Bruce, Its all right. I need to read the K3 manual a couple of times to get the answer as well. I do have another question. The offset of the K3 main 2.7Khz filter is -0.24. Since I bought my KRX3 at a later stage so that I do not have a match pair of 2.7Khz filters. The offset of the 2.7Khz filter in KRX3 is -0.94. From my reading of the manual, for diversity reception, I should set the off-set of both receivers at an average of -0.24 & -0.94. I just do not know whether my understanding is correct. Any idea?
TNX & 73, Johnny VR2XMC 從︰ Bruce Beford <[email protected]> 收件人︰ [email protected] 傳送日期︰ 2011年06月5日 (週日) 11:40 PM 主題︰ Re: [Elecraft] asking for operation tips - KRX3 Johnny- I'm sorry, it appears I was mistaken about the antenna switching on the K3. I have reviewed the antenna routing documentation for the sub receiver. I see that you -can- select ANT2 on the KAT3 ATU to connect to the sub receiver, while the main RX is connected to ANT1. Sorry for my confusion. 73, Bruce, ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
