I dont know about built in feature, but I have an ANC-4 that once and awhile I have to turn on to kill the noise from plasma TV's.
Sure do like digital modes where the TV noise is not that bad for me. Don KD8NNU On Wed, Jun 8, 2011 at 4:33 PM, Tim Tucker wrote: > OK, so it's somewhat of a loaded question to get people to read the > post, > but here goes: > > I recently installed the transverter/RX antenna board in my K3. I am > now in > the process of putting up a RX only antenna to use with an MFJ 1026 > Noise > Canceller to help get rid of what I believe to be a neighbor's plasma > TV > noise (and other interference). Initial tests with the 1026 using a > make-shift antenna have worked remarkably well and leave the K3's DSP > NR and > NB with much less noise to "clean up". > > So, the question is this: Is it possible to build this MFJ 1026 type > of > functionality built into the K3 in firmware as an included feature > with the > KXV3a? It would be really cool if you could just adjust the phase of > the > unwanted RX signal on the rig and have it remember the setting for > each > band. Then I wouldn't need this other MFJ box sitting here. > > Thoughts? > > Tim > AE6LX > www.worldwidedx.com > ______________________________________________________________ > Elecraft mailing list > Home: http://mailman.qth.net/mailman/listinfo/elecraft > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:Elecraft@mailman.qth.net > > This list hosted by: http://www.qsl.net > Please help support this email list: http://www.qsl.net/donate.html ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html