What radio do you have? How do you have it connected? Everything is suspect when you first set something like this up. Are you actually in DATA A mode (K3), or if a K2, are you in SSB mode (usually USB) - or RTTY mode on the K2? Does it work with a less complex software application like Digipan? If a K2, is your SSB carrier balance set properly? - you should have no carrier if it is correct?
Help with the answers to the above questions and tell us a bit more about how you have things set up - interface box if any, soundcard to K2/K3 audio connections, etc. With that information perhaps we can help, or at least give you some checkpoints to look at. 73, Don W3FPR On 6/12/2011 11:56 AM, JULIAN BRADBERRY wrote: > I am experiencing a problem trying to transmit PSK messages. I had a friend > work with me to determine if I was transmitting both carrier and text. The > carrier went out strong and solid but the text did not accompany the carrier. > I've checked the Codec settings, text and data setting and they are set > correctly. The signal link and power meter indicated that I was transmitting > OK. But no text. I'm using ham radio deluxe version 5 and dm780. Anybody > have any ideas how to overcome this issue? I have a hearing problem so text > is the best form of communication for me. > > WD4FTR > ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
