Tom, It should not be necessary to store ATU tuning in the VFO memories.
The ATU TUNE has its own set of "memory" - it remembers the L/C combination for any band/frequency segment/antenna that you have previously done a TUNE. When the transmit VFO is returned to that band/frequency segment, the ATU follows with the proper L/C combination. Of course, if you have physically changed the antenna that is used on that particular band segment since the last time an ATU TUNE was done, you will have to tap the ATU TUNE button. 73, Don W3FPR On 6/13/2011 2:55 PM, [email protected] wrote: > Hi All, > In the K3 Owner's manual I found: > > "The K3 has 100 general-purpose memories (00-99), > plus per-band memories (M1-M4 on each band). > Each memory holds VFO A and B frequencies, > modes, filter presets, antenna selection, and other > settings." > > Does anyone know what kind of the other setting ? > ATU tune setting for each memory also ? > > ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
