Since I stopped using HRD and turned Mac only, I have never once had the AGC turning off problem repeat itself (I am using a P3 too).
Therefore I am 100% sure that it is (what others have called 'aggressive') polling from HRD. It might be worth installing LP Bridge, because even though you may have no need to share a serial connection, it features buffering of the HRD data. That way you could keep using HRD. 73 Stephen G4SJP On 19 June 2011 09:48, Jens Petersen <[email protected]> wrote: > On Wed, 6 Apr 2011 13:38:08 -0500, you wrote: > > >Going back through some notes here seems to indicate that once > >I downed HRD while meeting the one and only SSB group I enjoy cured > >the problem. Why it is so sensitive to only the AGC on/off I have not > >a clue. But I had it no more after that. > > I have had this problem since I got my P3. > > I'm mostly running RTTY and other digimodes and in contests it happens > 1 or 2 times per hour, mostly while in TX. > > When I switch off the P3, the problem disapper. > > Today I loaded firmware 1.08 in P3 and then the problem occurs several > times per hour, just receiving. > > I'm using HRD. > K3 firmware is 4.25 > -- > OV1A Jens > > Sent from my desktop PC with a nice big screen and a real keyboard. > ______________________________________________________________ > Elecraft mailing list > Home: http://mailman.qth.net/mailman/listinfo/elecraft > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:[email protected] > > This list hosted by: http://www.qsl.net > Please help support this email list: http://www.qsl.net/donate.html > ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
