Jack Chomley wrote: > > Now I have a new XG3 in my hot little hands, thought it was time for a > fiddle. > After studying the release notes etc, I cannot see any place in the > software > to > set the PF1 memory? Is this what I need after sending > WM,[13de_vk4jrc:03[20de_vk4jrc:03[30de_vk4jrc:03[40:03#; > to the XG3? > Despite doing this in the command line, the XGS does not send anything, > other than its continuous carrier. > I have successfully upgraded the firmware to 1.14, that process worked > fine. > Does PF,01,01; need to be included in the above command string, to write > to the memory, so the PF1 button > will set the XG3 to transmit the string? Was looking to set this mode for > a > T Hunt test. >
From http://www.elecraft.com/XG3/xg3fwnotes.rtf (pages 4-5): ################################################ Morse Memory Example Use the XG3 Utility’s Command Tester (far right tab) to enter these commands: WM,^0de_w1aw:10^1:10^2:10*$60#; Changes the level to 0 dBm, then sends ‘de w1aw’, sends carrier at 0 dBm for 10 seconds, then changes the level to -33 dBm, sends carrier for 10 seconds, changes level to -73 dBm, sends carrier for 10 seconds, sends SK, pauses silent for 60 seconds and repeats indefinitely. Set up PF1 for Morse memory sending: PF,01,01; configure PF1 to send Morse memory. To play the memory, either hold down the Band+/PF1 key or send S,01; over the serial port. ################################################ IMHO the manual is a little cryptic but follow their examples and you'll eventually get there. Yes you do need to send PF,01,01 to assign the command to the PF1 button. 73, Bill -- View this message in context: http://elecraft.365791.n2.nabble.com/XG3-Sending-Morse-tp6511471p6511553.html Sent from the Elecraft mailing list archive at Nabble.com. ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
