Don may weigh in here, but as I recall this part is looking for shorts and wrong orientation of chip in socket. Check very carefully and triple check that U6 U8 U1 are properly oriented. That ok, you do not indicate shorts to ground by those values. My guess is then that you are OK and should move on.
73, Guy. On Tue, Jun 28, 2011 at 1:18 PM, vicki glover <[email protected]> wrote: > Guy, what have I messed up here? How do I find out what's wrong and how do I > fix it? Please help! > > > Control Board: > U6-PIN 13 - 31.8K > PIN 14 - 28.1K > PIN 29 - 29.8K > PIN 30 - 29.8K > U8-PIN 2 - 24.6K > PIN 15- 24.5K > PIN 16- 24.7K > > Front Panel Board: > U1-PIN 3 - 19.5K > PIN 4 - 20.3K > > 73 > mike glover KB3QJA > ______________________________________________________________ > Elecraft mailing list > Home: http://mailman.qth.net/mailman/listinfo/elecraft > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:[email protected] > > This list hosted by: http://www.qsl.net > Please help support this email list: http://www.qsl.net/donate.html > ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
