That confuses me - how does the Winkey chip send PTT based on data in the buffer? Is there a setting I am missing?
Buck k4ia On 6/28/2011 10:56 AM, Steve London wrote: > On 06/28/2011 08:37 AM, Joe Subich, W4TV wrote: > >> I'm concerned because you indicated that the CW Keyer PTT LED was >> lit. Even though you did not have a PTT line connected between the >> CW Keyer and K3, that tells me that N1MM had sent the WinKey PTT On >> command (and the K3 "TX1;" command) and did not send the PTT OFF >> commands when you hit the key. The fact that *BOTH* (potential) >> sources of PTT were engaged would point to an N1MM timing issue - >> I can't see both devices "missing" the PTT Off commands. > N1MM Logger only sets Winkey PTT for SSB. For CW, the Winkey PTT is set > automatically by the Winkey chip, based on data in the buffer, not by any N1MM > Logger command. > > 73, > Steve, N2IC > > > ------------------------------------ > > This list is for the exchange of information about the use and operation of > microHAM products. > > Anyone with specific hardware support issues should contact microHAM support > at mailto:[email protected]. > > Yahoo! Groups Links > > <*> To visit your group on the web, go to: > http://groups.yahoo.com/group/microHAM/ > > <*> Your email settings: > Individual Email | Traditional > > <*> To change settings online go to: > http://groups.yahoo.com/group/microHAM/join > (Yahoo! ID required) > > <*> To change settings via email: > [email protected] > [email protected] > > <*> To unsubscribe from this group, send an email to: > [email protected] > > <*> Your use of Yahoo! Groups is subject to: > http://docs.yahoo.com/info/terms/ > ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
