Wayne, No drawbacks as long as it is of a size the physically fits somewhere between the front panel and the control board.
73, Don W3FPR On 7/1/2011 12:23 PM, Wayne Conrad wrote: > On 07/01/11 09:00, Don Wilhelm wrote: >> You might want to connect a 100k pot initially (the detector input >> connects to the wiper) so you can adjust it until you are satisfied with >> the detector sensitivity, then measure the resistance from the wiper to >> each end of the pot and substitute fixed resistors for the pot. > Don, > > Are there any drawbacks to leaving the pot or trim-pot in the circuit > permanently? > > 73, Wayne Conrad KF7QGA > ______________________________________________________________ > Elecraft mailing list > Home: http://mailman.qth.net/mailman/listinfo/elecraft > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:[email protected] > > This list hosted by: http://www.qsl.net > Please help support this email list: http://www.qsl.net/donate.html > ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
