I noticed that after i connected the preamp into the back of my K3 that it works fine and things i couldn't hear before now come up out of the noise. It also is an ARR unit. But if i turn on the 2nd RX then i get a very loud frying noise. I have to trun off the external preamp in order to hear anything.. If i run just the internal preamp i don't have that problem. What this does to me is that i can't listen to one receiver in the CW portion of the band and the other receiver in the phone band with the external Preamp at the same time. Not that i do it a lot but times are that it is convenient. What i've been doing as a workaround is just set on rx in the SSB portion and one in the CW portion and swap back and forth with the A/B key. Does anyone else have this problem? Maybe there is something wrong internally in the radio or is this normal?
Larry W0OGH ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
