I am considering getting the Elecraft KPA500 amp for use with my Flex-5000a but need some suggestions on how to wire it to my antennas.
The KPA500 will work from 160 – 6M and I would like to use it with two dedicated outputs on my 5000. One is for 6 M and the other is to a SteppIR vertical on 80 – 10. The problem is that the KPA500 only has one input so I could only send one output at any one time to the KPA500. So the question is does anyone on the list have any suggestions how I can do the following? Most of the time the amp would be routed to the 80 – 10 output that goes to the SteppIR vertical. But some times it would also need to go to my stacked 6M loops. But I would like to find a switch(s) that lets me have both anternnas active all of the time with one port going to the amp and one going to the other antenna that would let me switch to the alternate antenna. at any time. Is there any product that will do this? 73 Zack N8FNR ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
