Another option is a fun kit to build designed by KK1L. It is a 2x6 antenna switch and SO2R band decoder board. The external switch has two inputs. This will allow you to put the amp inline with ANT1 and ANT2 straight to the second input. You can than select up to 6 antennas for either output. It has very good isolation and is not difficult to build.
You can also set it up to auto select antennas by using BCD decoding from the LPT port. 73 Greg AB7R On Thu, Jul 14, 2011 at 1:36 AM, Edward R. Cole <[email protected]> wrote: > I copied the wrong part number on the Surplus sales site: > s/b (KC) 12W1008 as the least expensive cross-over relay rated for >1kW > > the CX800M has UHF connectors and works on 12vdc, whereas the relay > above is N-connectors and requires 28vdc. > > > 73, Ed - KL7UW, WD2XSH/45 > ====================================== > BP40IQ 500 KHz - 10-GHz www.kl7uw.com > EME: 50-1.1kw?, 144-1.4kw, 432-100w, 1296-60w, 3400-? > DUBUS Magazine USA Rep [email protected] > ====================================== > > ______________________________________________________________ > Elecraft mailing list > Home: http://mailman.qth.net/mailman/listinfo/elecraft > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:[email protected] > > This list hosted by: http://www.qsl.net > Please help support this email list: http://www.qsl.net/donate.html > ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
