Mike, Does that happen with a dummy load? If it only happens with an antenna, you have a lot of RF in the shack that should be dealt with in your antenna system.
Do you have a stereo plug on the end of that hand key cable? If it is a mono plug it could be causing that condition. You must use a stereo plug for the K2 even though for a hand key only the tip and sleeve would be connected. 73, Don W3FPR On 7/13/2011 6:45 PM, vicki glover wrote: > Guys, > Just doing the Part III test and alignment and found that although the keyer > functions works ok, when I select the hand key option and try to key with the > old J38 the transmitter goes to continuous transmit after the first tap of > the key and will not stop unless I disconnect the key. Help? > 73 > mike KB3QJA > ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
