Tom, I know nothing about that particular amplifier, but I offer a few "in general" facts.
Pops in the K3 audio while keying an amp could be a sign of "hot switching" in the amplifier. Try increasing the keying delay in the K3 to see if that eliminates it. If not, check the relay "pull-in time" for the amp (plus any contact bounce time), and if it is not within the K3 Key-to-RF onset time, you will not be able to use QSK with that amplifier unless you can speed up its T/R relay. 73, Don W3FPR On 7/15/2011 8:42 PM, Tommy Alderman wrote: > Thanks to NV1B, K9ZTV,VK4FD, W3FPR and to Dick for the quick response. I > just updated the K3 and P3. Now if I could just get DELAY set correct so I > would not hear any 'pops' in my audio when keying my 9500 amp, all would be > well. It will take me a while to get back into the K3. > > Thanks again! > > Tom - W4BQF > > > ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
