Jim, You have both the K2 and the K3, so you don't have to wait for an actual "on the air" test. Connect the K2 to a dummy load, and connect a short antenna to the K3 - place the antenna close enough to the dummy load to give about an S-9 indication on the K3. Transmit with the K2 and listen with the K3 - you will know immediately whether it works or not.
73, Don W3FPR On 7/18/2011 12:44 PM, Jim Harris wrote: > Mike, > > Looks like Don was right. I haven't done an on air test with another station > yet but comparing my K2& K3 they now are the same after I changed the > sidebands. Hopefully, I can get an on air test in a day or so with a friend > to confirm all is well. In spite of my best effort I guess I goofed it up > the first time. I've been unable to find clear instructions in the assembly > manual nor other instructions available on the internet on what values are > correct for the BFO and DAC values. Those values are in the assembly manual > for LSB/USB and CW and it's reverse but not for RTTY. I guess I had a one in > two chance of getting it right and didn't do well on the odds. > ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
