Folks - who out there has set up their KPA500 as a part of a remote station? I'm planning to do so here, and wondering whether others have used the pins in the AUX cable or plan to use software commands to turn the Amp on and off, etc. It appears both may be options. There also appears to be a pin in the Aux cable that indicates a fault condition, which would be handy to monitor remotely (I have a LP-Remote board from N8LP).
I need to make a custom cable between the K3 and the KPA500 to connect some lines (band indication, auxbus?) and bring out others - the ON pin for the K3 that I currently use, the toggle ON/OFF pin for the KPA500, etc. So, what are others doing? I see there are options to connect the KPA to the K3 via RS232 not sure what that would buy me. Dana, K6NR ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
