Roy, Do you have any of the panhead 3/16 inch screws - like those that were used on the K2? If so, why not use those temporaily - they will hold things in place so you are not "dead in the water". I believe all the flathead screws are used on the outside panels, so it would not require any dis-assembly (other than removing the screws themselves) when your correct ones arrive.
73, Don W3FPR On 7/24/2011 6:27 PM, Roy Morris wrote: > It was interesting to read that others have found screws missing from the > KPA500 kit. I was missing all of the 4-40, 3/16" (4.8mm) Flat Head, Black > screws. I was able to complete the build, but I was not able to button it > up. I am dead in the water until the new screws arrive. I was able to > scrounge a few of these screws left over from parts of other Elecraft > projects but not enough to install the front and top panels. I am confident > these screws will arrive soon. Roy Morris W4WFB > ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
