I repeated the procedures that dealt with adjustments on the board, but skipped over things like the temperature calibration and current limit steps.
Mike AB3AP Jean-François Ménard wrote on 06/22/05 12:56 ET: > Did you redo an alignment of the KPA100 after, or you just changed the 2 > caps ? > > -----Message d'origine----- > De : [EMAIL PROTECTED] > [mailto:[EMAIL PROTECTED] De la part de Mike Markowski > Envoyé : 22 juin 2005 12:36 > Cc : Elecraft Reflector > Objet : Re: [Elecraft] KPA100 power on 20m/30m, update > > Vic Rosenthal wrote on 06/22/05 12:22 ET: > >>Stewart Baker wrote: >> >> >>>I had problems with HI CUR on 14 & 18MHz, 3.6 and 3.7 Amps respectively. >>>Changing C80 & C81 cured the problem, and I now have 2.9 and 2.4 Amps >>>drawn. >> >>What value did you change them to? > > > Apparently, all new kits will use 5600 pF, 5% caps for C80 and C81. > > Mike AB3AP _______________________________________________ Elecraft mailing list Post to: [email protected] You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com
