Ed, Definitely something wrong. How is your mic plug wired? You should have the AF connected to the tip and the AF return (or shield) connected to the shell.
If it is connected as a balanced microphone with the AF connected to the tip and AF return connected to the ring, and a shield connected to the shell, connect the ring to the shell. The K3 mic input is unbalanced. Sorry, but I do not know how the Flex mic wiring is configured. 73, Don W3FPR On 8/6/2011 4:31 PM, Ed Stallman wrote: > Iain , thanks for your input , I did look to be sure and I am plugged > into the Mic in the back ... Using the XMIT and monitoring the ALC > with Mic Gain at 60 , I get one bar on the alc meter...I was using > this Microphone and cable on a Flex 5K , Is the TRS plug wired the same ? > > Ed > > ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
