Unlikely. If it is activated, you get a 'Hi RFI' message on the VFO B display.
73, Eric --- www.elecraft.com On 8/9/2011 6:15 PM, James Sarte (K2QI) wrote: > Hi Eric, > > No, squelch is wide open. It was cutting out on SSB, FM, AM, etc. > For what it's worth, it isn't doing it anymore! Strange... I wonder > if lightning in the distance was causing the overload circuitry to > kick in. Is it possible? > > 73 de James K2QI > > On Tue, Aug 9, 2011 at 9:12 PM, Eric Swartz - WA6HHQ, Elecraft > <[email protected]> wrote: >> Hi James, >> >> Could you have the squelch turned up? >> >> 73, Eric WA6HHQ >> >> --- >> www.elecraft.com >> >> On 8/9/2011 5:56 PM, James Sarte (K2QI) wrote: >>> Not quite sure what's going on here; have had the K3 in storage for >>> about 4 months. Finally unpacked it after our move to PA and set it >>> up, and now audio is cutting in and out; as if it would just mute for >>> a few seconds (sometimes 4-5 secs) then come back to a normal level. >>> I'm wondering if the RF overload protection is engaging as the weather >>> here has been quite stormy, and I suspect lightning interference. How >>> can I confirm? It's been a long time since I've been on the air with >>> the K3 that I've forgotten quite a bit. >>> >>> Any suggestions? > > ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
