It was brought to my attention that VGA cables will not work with the K3 due to several pins being tied together which I was not aware of. So we will not offer them. In fact I discovered there are plenty listed on ebay at prices we cannot compete with.
It was a good thought, but best if you make up cables specifically for the K3 and interface to what is being connected. That is what I have done with my K3 (so far only using pin-7 for inhibit function). 73, Ed - KL7UW ------------------------------------------------- >Subject: Re: [Elecraft] VGA Cables (mate to K3-ACC Jack) >From: Monty Shultes <[email protected]> >Date: Wed, 10 Aug 2011 07:00:24 -0400 >To: "Edward R. Cole" <[email protected]> > > >That cable will not work. Many of the pins are shorted together. >Monty K2DLJ > >On Aug 10, 2011, at 1:37 AM, Edward R. Cole wrote: > > > I'm wondering if there is any interest from K3 owners for obtaining > > 15-pin VGA cables which directly mate to the K3 ACC jack? I have 40 > > NEW six-foot commercially-made cables with molded VGA-male connectors > > on each end. If there is enough interest we would offer them thru > > e-bay in single quantities. I'm not going to quote a price unless > > there is interest in them. > > > > 73, Ed - KL7UW, WD2XSH/45 ====================================== BP40IQ 500 KHz - 10-GHz www.kl7uw.com EME: 50-1.1kw?, 144-1.4kw, 432-100w, 1296-60w, 3400-? DUBUS Magazine USA Rep [email protected] ====================================== ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
