Try turning on NB, with LEVEL to T 1-7, 2-7, or 3-7. Set IF OFF. I use that for key clicks on CW and it's marvelous. I leave NB set to 1-7 that way for use when clicky stuff comes on. 73, Guy
On Mon, Aug 22, 2011 at 9:00 PM, Don Wilhelm <[email protected]> wrote: > Gary, > > There are several AGC parameters that overlap, so I don't know which one > is creating the most grief for you. > I encourage you to try adjusting the AGC threshold and slope as > indicated in my "Noisy K3" article on my website www.w3fpr.com. I would > think the slope parameter might be effective in reducing the effect of > your local noise spikes. > > It may be better to let the AGC handle the noise spike, but reduce the > delay so the reduction of gain is shorter. A bi of experimentation with > all the AGC parameters may be in order. > > 73, > Don W3FPR > > On 8/22/2011 8:33 PM, Gary Hinson wrote: > > Hi Elecrafties. > > > > Is it possible to alter the K3's AGC 'attack rate' (for want of a better > > phrase)? Specifically, I'd quite like to stop the AGC-S on SSB from > > dropping the gain so markedly in response to a short noise spike. > > > > > ______________________________________________________________ > Elecraft mailing list > Home: http://mailman.qth.net/mailman/listinfo/elecraft > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:[email protected] > > This list hosted by: http://www.qsl.net > Please help support this email list: http://www.qsl.net/donate.html > ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
