Hi, all concerned: I swl with the K3, and have been trying to make it scan the widest possible spans outside the ham bands.
In the process, I have accumulated a list of frequencies (found by tuning first A, then B, from 490 KHz to 30 MHz) where the K3 behave in interesting ways. The "A list" of frequencies differs somewhat from the "B list", and tuning down from 30 MHz to 490 KHz produces slightly different behavior. For example, set A to 8.999 Tap A>B Tune A up through 9.000 while observing B Did you hear any relay sounds? Tune A back down through 9.000 while observing B Tune B back and forth through 9.000 while observing A Any help out there with an explanation, please? Brgds, Dave Windisch, N3HE -- View this message in context: http://elecraft.365791.n2.nabble.com/I-just-know-there-s-an-explanation-for-this-K3-behavior-tp6719355p6719355.html Sent from the Elecraft mailing list archive at Nabble.com. ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
