Hi All, I would like to use the Ameritron ARI 500 with my ALS 600 and K3 to automatically switch the ALS 600 to the correct band. I know this will work for the ham bands but wonder if it will work for the frequencies between the ham bands for MARS work. The ALS 600 uses the following band edges: 160M (1.5-2.3), 80M (2.3-4.4), 40M (4.4-8.0), 20M (8.0-14.5) etc. I am wondering if the K3 uses the same band edges. For example if I operate on 2.4 MHz will the K3 send the BCD output to the ARI 500 for 80 Meters, or possibly 160 meters So I guess what I am asking is whether anyone knows the defined band edges for the K3 that go out the BAND (0-3) pins of the accessory connector. Thanks in advance.
Also wondering how the 60 meter band data affects the ARI 500, since the ALS 600 does not have a 60 meter position. Does the ARI 500 pick the 40 meter or 80 meter position for the ALS 600, when the K3 is used. -- 73, Steve Pituch, W2MY ARES EC Nueces County TX Army MARS: AAR6CX ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
