KRC2 built. It appears there are a couple of ways to wire the KRC2 with the K3. I have the KPA500 and am using the Aux bus so I think I should use the aux bus. The KRC2 will be used to drive an ICE 419 Bandpass filter unit.
I would appear that all I need to do is connect pin 6 on the KRC2 to pin 2 on the 15 pin connector and pin1 to pin 5. Why would one want to hook up using serial ports with or without logging? The entire setup will consist of a Microham MKII keyer or MK2R+ , K3, KPA500 and KRC2. It would appear that I would need another 15 pin splitter to run the MKII, KPA500 and KRC2 all on the the Aux Bus. I assume that the splitter that Electraft provided is 15 pins straight through? Mike W0MU ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
