Hi Ian, Yes. "The ATU settings are kept for each band and for each antenna. Each band has multiple segments as shown in Table 6 3 and the ATU will pick the tuning setting for that segment as you tune across the band. This means that the ATU will keep narrowband antennas in tune as you move around in the band. Each time you transmit the microcontroller will see if you have moved the VFO to another band segment and will automatically chose that setting for the L and C in the ATU. You can erase the stored L and C values for any band by tapping CLR when in the CONFIG:KAT3 menu."
Your owner's manual also describes this on page 22 also. Fred Cady fcady at ieee dot org "The Elecraft K3: Design, Configuration, and Operation" www.ke7x.com Lulu 15% discount for the month of September. Enter code AWESOME305 > -----Original Message----- > From: [email protected] [mailto:elecraft- > [email protected]] On Behalf Of Iain Haywood > Sent: Saturday, September 03, 2011 8:50 AM > To: [email protected] > Subject: [Elecraft] K3 ATU question > > Hi, > Just a quicky, probably been answered but cant find it.. > > Does the KAT3 have separate settings memory for each antenna input? > > Im just about to go mobile and wondered if I used the other antenna > input I wouldn't mess up all my home antenna settings. > > > > -- > *Iain Haywood* G4SGX > > ______________________________________________________________ > Elecraft mailing list > Home: http://mailman.qth.net/mailman/listinfo/elecraft > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:[email protected] > > This list hosted by: http://www.qsl.net > Please help support this email list: http://www.qsl.net/donate.html ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
