A 67? Must be a VM guy. I grew up on MFT Try an alternate USB to Serial adapter. That's the easiest to replace.
Dick On Sep 6, 2011, at 14:57, stan levandowski <[email protected]> wrote: > My K3 (#5244) mysteriously stopped working with HRD. It had been > working FB for months. HRD claimed it could not connect with the K3. > I then tried it with the K3 Utility and I got the following: > > Xe2000011 Bootstrap loader did not echo a D > MCU Firmware load failed > > It's a K3/10 which I built and it works just fine except for this. The > USB cable is the Elecraft product. > > So far I've downloaded a 'fresh' copy of the utility, cold-started the > system, and reviewed the process. > > I'm not particularly computer-literate when it comes to this new-fangled > stuff and I'm becoming less enthusiastic every day ;-) > (Gimme a System 360/Mod 67, a bank of 2400 bpi tapes, and assembler > language any day!) > > Any suggestions would be appreciated. My gut feel is that it's in the > K3. The sudden cessation of communication with HRD for no apparent > reason makes me think this way. > > 73, Stan WB2LQF > > ______________________________________________________________ > Elecraft mailing list > Home: http://mailman.qth.net/mailman/listinfo/elecraft > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:[email protected] > > This list hosted by: http://www.qsl.net > Please help support this email list: http://www.qsl.net/donate.html ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
