Hi Jack: It looks like the features of the Operate Tab in the KPA Utility will provide what I need. Now to get it working thru the RRC-1258 units.
Can I suggest that the KPA500 Owner's Manual be updated to point to the Remote Control capability using the KPA Utility. I completely missed it until you gave me the pointer. Thanks. 73, Doug VE3MV ----- Original Message ----- From: "Jack Brindle" <[email protected]> To: "D Joyce" <[email protected]> Cc: "Elecraft List" <[email protected]> Sent: Tuesday, September 06, 2011 6:28 PM Subject: Re: [Elecraft] W2 and use with computer > Doug; > > Why not just connect the serial port directly to the KPA500's PC port so > you can directly control and monitor the KPA500? You can control power of > the KPA500 through the serial port as well as command and monitor it. > > The KPA500 serial control spec is on the Elecraft web page in the manuals > section. > > Jack Brindle, W6FB > > >> >> 73 >> >> Doug VE3MV ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
