Jim, The rear mic jack itself is stereo, but the signal path is mono - which means only the tip and shell are connected in the jack (no connection to the ring). OTOH, if the mic plug is stereo and connects only to tip and ring instead of tip and shell, then there will be no connection for one of the plug wires.
73, Don W3FPR On 9/13/2011 1:28 PM, Jim Hoge wrote: > Are you running the mic into the rear panel? If so, check your wiring. I ran > into this problem. You will need either jumper shield and ground or reverse > the two wires as the 1/8" mic jack is mono, not stereo. > > 73, Jim W5QM > ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
