Rob,

The line cord was not in a bag, maybe that is why I can't find the fuses. Maybe 
the radio shack fuses are a bit larger in diameter than the Elecraft fuses and 
that is why when the fuse block is inserted in the rear of the KPA-500 the fuse 
block door won't close.  The fuse block is seated properly, just like the 
picture in the manual, so I maybe I won't worry about the door?



Jim  K2ZF





-----Original Message-----
From: k6rb <k...@baymoon.com>
To: k2zf50 <k2z...@aol.com>
Cc: elecraft <elecraft@mailman.qth.net>
Sent: Fri, Sep 16, 2011 5:24 am
Subject: Re: [Elecraft] KPA-500 fuse block door


Jim,

The fuses would have been in two small brown envelopes in the same bag as
the line cord. Double check to make sure that they did, in fact, omit
packing them.

Rob K6RB


> Hi,
>
>
>
> The Radio Shack fuses that I am using because Elecraft forgot to include
> them with my KPA-500 may be the reason the fuse block door is not closing.
> I have the fuse block seated correctly. There is a resistance to push the
> fuse block into the KPA-500 and I have done that correctly. I am going to
> call Elecraft and have them send me the fuses that were not included with
> my amplifier.
>
>
> Thanks for everyone's suggestions.
>
>
>
> 73, Jim Douglas  K2ZF
>
>
>
>
> -----Original Message-----
> From: Mike Fatchett W0MU <w...@w0mu.com>
> To: elecraft <elecraft@mailman.qth.net>
> Sent: Thu, Sep 15, 2011 7:05 pm
> Subject: Re: [Elecraft] KPA-500 fuse block door
>
>
> You should have received a fuse package for both 220 and 110v fuses.
> The door should close.
>
> On 9/15/2011 8:39 PM, k2z...@aol.com wrote:
>> Hi,
>>
>>
>> I just received my factory built KPA-500 amplifier. The fuses were not
> included with the amp so I went to Radio Shack and picked up two 3 AG 6
> amp
> fuses for 240 v operation.
>> With the fuses installed the fuse block door will not close. Is this
>> normal?
> With the fuses out of the fuse block the door closes perfectly but with
> the
> fuses installed I just can't close it.
>>
>>
>> Any suggestions?
>>
>>
>> Thanks,
>> Jim Douglas  K2ZF
>> ______________________________________________________________
>> Elecraft mailing list
>> Home: http://mailman.qth.net/mailman/listinfo/elecraft
>> Help: http://mailman.qth.net/mmfaq.htm
>> Post: mailto:Elecraft@mailman.qth.net
>>
>> This list hosted by: http://www.qsl.net
>> Please help support this email list: http://www.qsl.net/donate.html
>
> --
> J6/W0MU November 21 - December 1 2011 CQ WW DX CW
>
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft@mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
>
>
>
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft@mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
>
>



 

______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

Reply via email to