If you've run the TX gain calibration, and that worked properly, it sounds more like you have an actual load problem. Which would cause high current.
Is the high current warning happening both with a known good 50 ohm load connected to the K3 and with the antenna? Sent from my iPhone On Sep 18, 2011, at 8:45 AM, [email protected] wrote: > Hi Ray, > > > Thanks or your response. I have found that on 20 meters my K3 displays a high > current warning above 80 watts displayed on the K3. Other bands I can > transmit at 100 watts and no high current warning. I believe that is because > the watt meter I have been using is not accurate and the K3 may be putting > out in excess at this power level displayed on the K3 meter and therefore the > high current warning. ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
