Perhaps is Erwin a contester in a M/M group It will be nice to make all the prived bring in K3 to be configured in the same way to make them equal
This isn''t possible because a copy is bound to the serial of the K3 Peter PC2A Don Wilhelm schreef: > Erwin, > > K3Utility has provisions for saving the K3 configuration to a file on > your computer, and then re-loading that configuration. It is not a > macro, the file is unique to K3 Utility. > > I do not understand why a macro is wanted/needed, but you may have > something specific in mind. > If that is the case, refer to the K3 Programmer's Reference. Virtually > everything in the K3 can be accessed by software, and if you write the > software to create a macro and send it back to the K3, yes it could be > done, but I don't think that is done with any current software package. > > 73, > Don W3FPR > > On 9/21/2011 2:11 PM, DK5EW wrote: > >> Hi all, >> is the a possibility to read out the K3 settings and save it as a macro ? >> best regards Erwin/DK5EW >> >> > ______________________________________________________________ > Elecraft mailing list > Home: http://mailman.qth.net/mailman/listinfo/elecraft > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:[email protected] > > This list hosted by: http://www.qsl.net > Please help support this email list: http://www.qsl.net/donate.html > ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
