Hi all, I discover a problem using a external transverter with the K3 - this machine is going to cost me nerves ! I use a external transverter for 144 MHz using XVTR out/in break out BNC. When I'm in ssb mode and push xmit "without connected any microphone" my transverter shows power up to his max. of 60w. When I switch K3 monitor on -> level 50 there is a noise like a motor from a driving car. So there must be Pout from K3. Also I can't regulate the power on the K3 for driving the transverter. Same is in DATA-A mode. In FM mode this effect is not there. I checked all I could in the config menu but did not any fault setting. Any help on this strange problem ? best regards Erwin/DK5EW
----- eMail ist virenfrei. Von AVG überprüft - www.avg.de Version: 10.0.1410 / Virendatenbank: 1520/3912 - Ausgabedatum: 22.09.2011 ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
