Wayne, I ran into an application that may relate to remote operations of the K3. Not exactly sure what the definitiion of "remote" means as you are using it.
I have a situation where I need to control the K3 VFO in Tx from another program (actually is a digital mode) and suspect that there would be a way using the serial I/F. The sw I am using displays 90-KHz of bandwidth from a LP-PAN connected to the K3 and decodes all JT-65 signals in the bw. The software enables one to click on a particular frequency to transmit. I'm pretty sure that the sw has not been set up to talk to a K3. Most are using a special SDR called the WSE. The K3 VFO is set on the mid-freq of the 90-KHz band for Rx (easily done manually), but to change freq for transmit some kind of remote connection is needed as the sw automatically controls Rx/Tx switching via RTS or DTR lines. This is in the DATA mode, of course. The sw is MAP65 by Joe Taylor, K1JT and becoming very popular for eme. This may require a collaboration between the K3 remote sw and MAP65. I am not a sw designer or even a programmer so excuse the naiveness of my question (getting my feet wet without boots). I assume that programs like HRD do not currently have the ability to control the K3. 73, Ed - KL7UW, WD2XSH/45 ====================================== BP40IQ 500 KHz - 10-GHz www.kl7uw.com EME: 50-1.1kw?, 144-1.4kw, 432-QRT, 1296-?, 3400-? DUBUS Magazine USA Rep [email protected] ====================================== ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
