[K3] That sounds like the expected behavior when the 80M band has been disabled. Check the CONFIG menu item, "BND MAP" (band map) -- page 54 of the rev D manual.
Mark AD5SS On Sat, Oct 1, 2011 at 6:39 PM, JOHN POWELL <[email protected]> wrote: > I have only just noticed that I am unable to acquire 80m band access when > paging, either up and down, with the Band change button. All other bands from > 160m to 6m are available. However, when manually entering an 80m frequency > through the Freq Entry process I have 80m availability, but when changing > bands again the 80m after this is lost. I have maintained all MCU upgrades as > and when they have become available, including the latest - 4.25. > Any suggestions as to the corrective measures required to remedy this problem > would be most welcome. Maybe I have a "fat finger problem" !!. > Thanks in advance for your help. > > 73 > John Powell. ZL1BHQ > K3 S/N 1621 ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
