Dave, Test the coax with your dummy load attached to the far end - remove the PL-259 from the K3 and measure the resistance between the center conductor and the shell - if it reads something vastly different than 50 ohms, replace the coax.
OTOH, if you find the resistance is 50 ohms, make certain you have the PL-259 connected to the selected ANT1 or ANT2 jack. If the problem persists, send an email to [email protected] for further assistance. 73, Don W3FPR On 10/2/2011 2:02 PM, [email protected] wrote: > Getting around to calibrating my power on my K3-10 and no matter what the > load, dummy or antenna, the reflected power is 99.9 to 1. Tuner is set to > Bypass. What did I do wrong? > > Thanks in advance, Dave > ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
