This sounds like a problem I had when building my KPA - improperly inserted ribbon cables. It is very easy to insert some of the connectors offset by one pin or even an entire row of pins. Check all ribbon cable connections very carefully.
/Rick N6XI On Sat, Oct 29, 2011 at 10:21 AM, Nicolas Drin <[email protected]> wrote: > Hi > > I just finished to build KPA500 #455. Unfortunately I found several > problems. > > 1/ fan is not working (I already checked that the 2 wires are a the right > place on the plug - no inversion like someone reported earlier) > > 2/ I coupled the KPA500 to the K3 with the KPAK3aux from Elecraft. For some > bands (14,21,10,5.3) when I push the button on the front of KPA500 the band > is changed on K3 but NOT on KPA500 (example 14 gives 1,8 - 21 gives 7) ! > For > this 4 bands, in TX mode, the KPA500 automatic band switching selects the > proper band. > > I thought to a software problem and i tried to reload the firmware (after a > parameter reset to default value) and I run to my third problem... > > 3/No communication available with the KPA500. I tried two configurations > Mac > and PC. The serial / USB cable is the KUSB from Elecraft and both systems > are perfectly working with K3 and P3 so I am pretty sure that it is a > KPA500 > problem. > > I don't have the schematics of the KPA500 (and in the other hand I'm not a > brilliant technician...) so any help will be appreciated. I should mention > that I already build Norcal 40, SIERRA, K1, KX1, K2, K3, P3 so I have a > little experience and I already checked that I didn't make any mistake > (wire ribbon cable inversion or badly plugged, no thermal insulator). I > performed all test with success with my DMM during the building. > > Last point the HF module seems to wok without problem. > > So again thank in advance for any help > > Nicolas, F5HFZ > > -- > View this message in context: > http://elecraft.365791.n2.nabble.com/KPA-455-not-very-well-tp6943877p6943877.html > Sent from the Elecraft mailing list archive at Nabble.com. > ______________________________________________________________ > Elecraft mailing list > Home: http://mailman.qth.net/mailman/listinfo/elecraft > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:[email protected] > > This list hosted by: http://www.qsl.net > Please help support this email list: http://www.qsl.net/donate.html > -- Rick Tavan N6XI Truckee, CA ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
