and the 10 Quick Memories enable band > to band hopping with ease. The Quick Memories will go back to the last > used frequency on a band
Looking at the Config option "MEM 0-9." Adding band stacking requires having multiple memories for each band. The additions could be: Add a config option to enable band stacking in "MEM 0-9" after this: >From then on, tapping M>V , then #1 , will take you to your last-used frequency on 160 m, just as if you had used the BAND switch. Add this: If "Band Stacking" is enabled, tapping M>V , then #1 again. will take you to your last-used frequency on 160 m in the next band stack memory. The next level of utility would be to add a configuration parameter which remaps a user selectable button to rotate through the bands stacking registers on the present band. Possible suggestions are: XIT, REV(hold), MODE. This addition will add an easy single button push to rotate through the stacking registers. Having the above config remap button allows one to use band stacking without enabling "MEM 0-9" The process would be to use BAND to switch to a band, then use band stack toggle button to rotate through the stacking memories. John ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
