The P3 does remember center frequency per band. However, if you tune the K3 VFO A to a frequency outside the old P3 display range, then the P3 center frequency is changed according to the rules specified by the "FixMode" menu setting. If you want the center frequency never to change no matter what frequency the K3 is set to, then set MENU:FixMode to "Static".
Alan N1AL > I am not sure how to set the P3 center frequency in the fixed mode so that > it > stays put between band changes. I use the M keys + number to select bands. > I > can save all the band settings using V>M key. If I have a span of 20 Khz > on > the P3, set the center to say 14.30 Mhz, it will not stay saved. Switch > band > to 3965 Khz and back and it will go to 14.35 Mhz - sometimes but not > always. > > Does the P3 "remember" settings along with K3?? > > Gill W4RYW > > -- > View this message in context: > http://elecraft.365791.n2.nabble.com/P3-Center-Freq-save-per-band-tp6949392p6949392.html > Sent from the Elecraft mailing list archive at Nabble.com. > ______________________________________________________________ > Elecraft mailing list > Home: http://mailman.qth.net/mailman/listinfo/elecraft > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:[email protected] > > This list hosted by: http://www.qsl.net > Please help support this email list: http://www.qsl.net/donate.html > > ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
