Just found out the clicking occurs when the KPA 500 is in line. I do not hear the clicking when unkeying using the rig barefoot, but only occurs when the amp is turned on and active. I am using the special K3 to KPA 500 cabling.
This does not occur when not in Diversity mode, but does occur when in diversity mode on cw. Toby W4CAK ----- Original Message ----- From: Toby Pennington To: [email protected] Sent: Thursday, November 10, 2011 8:38 PM Subject: Click or Pop Sound Using Diversity Receive I am using diversity receive on CW and notice a pop or click (sounds like a relay ) after sending a word (semi bk-in ). This does not occur with the AUX ANT disengaged as I am no longer using the second antenna. My rig is set up to use the second receiver antenna attached to ant port #2 instead of the BNC arrangement for AUX receive. When I bought this rig used it was set up that way. I wonder if this may have something to do with it? Any ideas? Toby W4CAK ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
