Tom, I believe I can answer that - the only thing you need with the DL1 is a DVM and you can either use the formula or the graph from the manual to determine the power.
In other words, yes the circuitry is built into the DL1, but a caution, you will find the formula a bit different than the normal because the diode probe circuitry is connected across half the load rather than across the full 50 ohms. 73, Don W3FPR > -----Original Message----- > > Chuck and all. > > Can you tell me if you need to use an RF probe along with the > DL-1, or is > the circuitry built into the DL-1 and you can just use the DMM probes? > > Thanks. > Tom > WB2QDG > > -- No virus found in this outgoing message. Checked by AVG Anti-Virus. Version: 7.0.323 / Virus Database: 267.8.8/37 - Release Date: 7/1/2005 _______________________________________________ Elecraft mailing list Post to: [email protected] You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com
