Thanks for all the correct answers, I selected the rx antenna on 10 meters and all is well. Still learning about my K3.
Thanks all, W9HAK Smith Bradford Don Wilhelm wrote: > Do you have the correct antenna selected (this is a per band setting)? > Do you have the RX ant selected? > There is a little feedthrough under those conditions, but only strong > signals will be heard. > > 73, > Don W3FPR > > On 11/15/2011 2:06 PM, W9HAK wrote: >> Hello list, >> >> My K3, serial number 3953, hears only the strongest signals on 10 >> meters. I observe that the noise floor displayed on the P3 is around >> -140 db. Switching the antenna in and out does not change this reading. >> On the lower bands I see a noise floor change. It's like the antenna >> isn't being attached. The transmitter works on 10 meters with an 1:1 >> swr. The pre amp moves the noise floor as I expected. >> >> Any suggestions? >> >> W9HAK >> Smith Bradford >> ______________________________________________________________ >> Elecraft mailing list >> Home: http://mailman.qth.net/mailman/listinfo/elecraft >> Help: http://mailman.qth.net/mmfaq.htm >> Post: mailto:[email protected] >> >> This list hosted by: http://www.qsl.net >> Please help support this email list: http://www.qsl.net/donate.html >> > > > ----- > No virus found in this message. > Checked by AVG - www.avg.com > Version: 2012.0.1869 / Virus Database: 2092/4618 - Release Date: 11/15/11 > > ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
