Sante, If you are using N1MM/MMTTY or any other standard digital mode application for FSK you MUST build an interface (or purchase one) that connects to pins 1 and 5 on the K3 ACCY port. FSK can not be keyed via the RS232 port.
For casual operating you CAN use the K3 Utility terminal tab and send CW/PSK and FSK over the serial port as ASCII but it is not keying the FSK lines when you do this. 73 Greg AB7R On Wed, Nov 16, 2011 at 3:36 AM, Sante - IK0HBN <[email protected]> wrote: > Hi All, > one of my friend have given several days ago the duty of setting his > K3 with N1MM and MMTTY. Surely it's a good start for me with this > radio, but as at moment I'm not an owner of such a cake, I need your help. > > Purpose: Using K3 with a single True Serial cable to manage FSK, CW > and triggering DVK Voice message of K3. This radio has been purchased > with its internal DVR and I found the G4IFB posting useful to trigger > DVR memories (http://www.g4ifb.com/html/elecraft_k2_k3.html#TrigerDVR). > > I need to know if there is a way to go out in TRUE FSK using the CAT > cable Computer-K3. I read that CW should be possible, even if CW will > not be brillant for the delays of WinXP multitasking. > > Thank you > Sante > > ______________________________________________________________ > Elecraft mailing list > Home: http://mailman.qth.net/mailman/listinfo/elecraft > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:[email protected] > > This list hosted by: http://www.qsl.net > Please help support this email list: http://www.qsl.net/donate.html > ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
