Thanks to all who tried to help me with this problem. Everything that you guys suggested I either made the change or already had the settings correct. Nothing corrected the problem. The ALC reading is always full scale even with MIC and CMP both set to zero. I sent an email to K3support but don't expect to hear from them until Monday. May have to pull the old MP1000 field out of moth balls for the SS SSB. Guess I should have tried to set it up earlier this week (UGH!).
Thanks again to Mike, Greg, Mark, Bill and Jim for their help 73 Joe K2UF No trees were harmed in the sending of this e-mail; however, many electrons were inconvenienced. -----Original Message----- From: [email protected] [mailto:[email protected]] On Behalf Of Joe K2UF Sent: Friday, November 18, 2011 9:57 PM To: [email protected] Subject: [Elecraft] K3 SSB help I am trying to get my K3 set up for SS SSB. I am in test mode. I have selected CMP/ALC. CMP is set to 0. The MIC control has no affect on the ALC reading it is always at full scale. I must be missing something. Any help? Joe K2UF No trees were harmed in the sending of this e-mail; however, many electrons were inconvenienced. ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
