Another thing to check is the internal SLUSB audio level settings for RX and 
TX.  I had to set the pin for boosting the RX audio level to get it working 
between my K3 and my iMac.  I use Cocoa Modem on the iMac.  Other then standard 
settings you need to do for K3, this was the only "experiment" I had to do 
before I got it to work.  This is documented in the SLUSB user manual under the 
section "Special Jumpers".

73, phil, K7PEH

On Nov 19, 2011, at 11:04 AM, David Herring wrote:

> Hey Joel,
> 
> Since you have used the SLUSB with the Yaesu, have you cross-referenced the 
> jumpers across the jumper block inside the SLUSB with the K3 cable to make 
> sure that the jumpers are putting the signals out on the right pins for said 
> K3 cable?  
> 
> I have never used a Yaesu cable or a commercial K3 cable with the SLUSB (I 
> made my own cable using a cat-5 ethernet cable), so this may be a moot 
> suggestion, but then on the other hand, it would not be the first time that 
> cables from the same manufacturer required a different pin out...
> 
> 73 & Aloha,
> Dave, AH6TD
> 
> 
> On Nov 19, 2011, at 8:54 AM, Joel Black wrote:
> 
>> Sorry, I failed to mention that I am familiar with setting up the 
>> SLUSB.  I used it with my FT-857.  That was my oversight for not 
>> mentioning it.  I'm just trying to get it working with the K3.  I'm just 
>> missing something.
>> 
>> The E-MU 0204 is working FB right now with the K3 so I know the audio 
>> I/O works on the back with a soundcard.  It's just going to take me 
>> getting the right combination.  However, the 0204 is going to be my 
>> panadapter input so I will need to figure out the SLUSB.
>> 
>> I appreciate all the helpful suggestions.
>> 
>> Again, my apologies for cross-posting.
>> 
>> 73,
>> Joel - W4JBB
>> ______________________________________________________________
>> Elecraft mailing list
>> Home: http://mailman.qth.net/mailman/listinfo/elecraft
>> Help: http://mailman.qth.net/mmfaq.htm
>> Post: mailto:[email protected]
>> 
>> This list hosted by: http://www.qsl.net
>> Please help support this email list: http://www.qsl.net/donate.html
> 
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:[email protected]
> 
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html

______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[email protected]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

Reply via email to