Sorry this was late, I thought I sent it to the list a few days ago, but it only went to Byron when I hit reply.
Rick NHC > Joel, > > I did not rewire the jumpers for the K3, but left them set for my Kenwood > so I could switch back and forth, if needed by attaching the appropriate > cable. > > The jumpers for the Kenwood are straight across, 1, 2, 3, 6, 7, 8. If you > move the internal jumpers, base the wiring on the NON-RJ45 side. > > 1 is Speaker, line OUT > 2 is MIC, line IN > 3 is PTT (which I connected to CW Key) > 4; 5 not used > 6-8 are ground (all the same, and NOT chassis) > > I hope this helps. > > Rick WA6NHC > > > -----Original Message----- > From: Byron Servies > > Hi Joel, > > At the top of this page: > > http://www.tigertronics.com/sl_wirebm.htm#Elecraft > > they show how SignaLink numbers the RJ45 pins. So, if you match the > wiring in the table for the K3 to the numbering scheme for their > RJ45's you should be fine. > > 73, Byron N6NUL > > On Fri, Nov 18, 2011 at 3:44 PM, Joel Black <[email protected]> wrote: > > If anyone is using the SignaLink USB, can someone tell me the wiring to > > the K3? > > > > I think I have rolled Line In and Line Out. > > > > Here's what I have: > > > > From the SignaLink RJ-45: > > > > Pin 1 -> SPKR goes to LINE IN (mono) on the K3 > > Pin 2 -> GND > > Pin 3 -> MIC goes to LINE OUT (stereo connection with tip and gnd only) > > on the K3 > > Pin 4 -> GND > > Pin 5 -> PTT goes to PTT IN on the K3 > > Pin 6 -> GND > > > > Please don't get into the argument about how I can just use the LINE > > IN/LINE OUT and connect to my computer's soundcard. I am aware of > > that. I have very specific and very good reasons for using the > > SignaLink. I just need some help with the wiring. > > > > Thanks, > > Joel - W4JBB ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
