Afternoon Don and the group, Thanks for the quick response..
We're running the stock 2.7 filter in slot 3 and the FM filter in slot 1.. CW and SSB all running fine with no issues.. In fact, the FM didn't sound half bad coming thru the 2.7 filter while playing around with it this afternoon. Filter has not been moved since the day I put it in, just added the KFL3B-FM to slot 1. I've gone thru the config process and made sure everything was on and verified that in FM mode, XFIL1 appears on the screen. I setup/verified the filter options using the K3 utility last night and all seemed well there.. I did noticed last night once everything was installed that the background static was a lot higher when I kicked it into FM mode so I'm willing to bet I am over driving the audio path somewhere. Strictly using the FM filter for FM.. As mentioned I have not had any other issues with audio quality on any other mode until I try to listen to anything on FM either on 10 or 6. Other than that, radio (Serial # 1051) is stock with no other modifications.. Since the bands are now pretty dead, I am doing all the testing with my 817 in house. As mentioned, TX audio sounds really good, the RX audio though sound just plain distorted as though it were being over-drivin or I'm not quite centered in the filter passband.. Pete - WD6DKW ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
