Tony, The power level is displayed if you change the Power knob even a small amount - just rotate he knob a little to see the current power.
The bandwidth graphic already shows the bandwidth in use. While it has some granularity, it is still a good indicator of the DSP bandwidth. The exact bandwidth and/or high-cut, low-cut frequencies (or Shift/Width) are shown in the VFO B display when a change is made. I think what you are requesting is already there. 73, Don W3FPR On 11/29/2011 9:08 PM, ANTHONY JAPHA wrote: > It would be great if the power level for the instant band was shown on the > display. Particularly so for users who use different power levels on the > various bands. Another thing that would be good to show is the bandwidth in > use, not only the filter selected. Maybe both. > Tnx and 73, > Tony, N2UN > ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
