Thanks of Don and Ron! I've got the picture now.
gene WG7GW On Dec 1, 2011, at 9:57 PM, Don Wilhelm wrote: > Gene, > > You must connect the DMM in series with the power supply. Remove the > positive lead from your power supply and connect the negative lead of your > DMM to the power supply terminal, then connect the positive lead of your DMM > to the + wire going to the KPA100. > > The instructions are written for the normal installation where the KPA100 is > installed in place of the QRP top cover, but the same thing applies - adjust > the bias so the current increase is 400 mA. > > I might suggest that you initially put the KPA100 on the K2 as called for in > the instructions. Then when all is working normally, move the KPA100 to the > EC2 enclosure; There is no need to complicate the picture by introducing > extra variables into the situation. Keep everything as simple as possible > during the "bring up" steps, and then add the necessary complexity after > those basic steps have been taken and operation verified. > > 73, > Don W3FPR ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
